ProMiles API is used by both Brokerage Dispatch and Truck Dispatch

Action: Prepare new Brokerage load and new Truck load

Action:

• Open the “Brokerage Dispatch” form, look at the “Update miles” button and the “Mileage Utilities” menu.
• Open the “Truck Dispatch” form, look at the “Calc miles” button and the “Mileage Utilities” menu.

Excpectation They must be inactive.

Action: Remember their real state

Action: Open “System → Settings” menu

Expection: Form “Dr.Dispatch System Configuration” will open Action: Select “ProMiles SDK” from the left column and look at the checkbox “Use ProMiles Prime”. Check: If the checkbox is not checked, the “Update miles” button and the “Mileage Utilities” menu should be inactive. If everything is correct - check the box, and proceed to the next step ===== Checking work with correct settings ===== Actions: * Select System → Setting → ProMiles SDK (1) * Check the box “Use ProMiles Prime” (2) * Enter the correct key in the “ProMiles Prime API key” field (3) and close window * Reopen broker window Be sure to close and open * Select the load created for this test ==== Check calculating miles ==== The check is carried out twice, for brokerage and and for Truck loading. === Brokerage load === Action: Open the Broker load created in preparation for the test. Click “Update Miles” button Expection: The length of the route must be calculated and the value entered in the field “miles” An approximate check of the calculated value can be done by building a route in Google maps. Action: Click on “show route” Expection: A Google map will open in the browser window with a built route from the first to the last point The length of the route obtained on a Google map and calculated by “ProMiles” may differ slightly due to different principles for building a route for cars and trucks Action: You need to add one more stop, repeat the calculation check Expection: The distance in the Miles field should increase. Action: Check it again on google map Action: Swap 2nd and 3rd stops Expection: The route should be built differently and the distance in the Miles field should change. Action: Check it again on google map === Truck load === Open the Truck load created in preparation for the test. Repeat all the steps as for the brokerage load, but the mileage calculation button here is called “Calc Miles” ==== Check Quick Mile/Routing ==== This function calls the same window both in the Brokerage Dispatcher and in the Cargo Dispatcher, and therefore it is enough to check once Action: ===== Checking work with incorrect settings ===== Action: Do not fill in the “ProMiles Prime API key” field (or fill it with a random set of characters) and close window Action: Reopen broker window Be sure to close and open Action: Press “Update Miles” Excpection: Miles field must by 0 Action: Quick Mile/Routing Excpectation: Show error message