This is an old revision of the document!
Table of Contents
ProMiles SDK testing
Presetting
Action: Prepare new load
Checking if ProMiles SDK is enabled
Action Open the “Brokerage Dispatch” form, look at the “Update miles” button and the “Mileage Utilities” menu.
Excpectation They must be inactive.
Action Remember their real state
Action: Open “System → Settings” menu
Expection: Form “Dr.Dispatch System Configuration” will open
Action: Select “ProMiles SDK” from the left column and look at the checkbox “Use ProMiles Prime”.
Check: If the checkbox is not checked, the “Update miles” button and the “Mileage Utilities” menu should be inactive.
If everything is correct - check the box, and proceed to the next step
Checking work with correct settings
Actions:
- Enter the correct key in the “ProMiles Prime API key” field and close window
- Reopen broker window Be sure to close and open
- Select the load created for this test
Check calculating miles
Action: Click “Update Miles” button
Expected: The length of the route must be calculated and the value entered in the field “miles”
An approximate check of the calculated value can be done by building a route in Google maps.
Action: Click on “show route”
Expected: A Google map will open in the browser window with a built route from the first to the last point
The length of the route obtained on a Google map and calculated by “ProMiles” may differ slightly due to different principles for building a route for cars and trucks
Checking work with incorrect settings
Action: Do not fill in the “ProMiles Prime API key” field (or fill it with a random set of characters) and close window
Action: Reopen broker window Be sure to close and open
Action: Press “Update Miles”
Excpectation: Miles field must by 0
Action: Quick Mile/Routing
Excpectation: Show error message 
