Before you create a trip, you must create one or more loads that will be included in the trip. At the same time, they need to check the box “LTL Partial”

Remember the selected Driver 1, Trk/Unit and Trailer (to check their change)

Action:

• Open the “Load Planning” tab
• Press LTL

Excpect: A window will be displayed with 2 grids: the top one contains all loads that have the “LTL Partial” attribute, but are not yet associated with trips. Action:

• The bottom one contains all previously created trips.
• Add a new trip by clicking on the New Trip button.

Excpect: Another row will appear in the lower grid

Action: Select 1 or more rows of the top grid, drag them and release them on the desired line of the lower grid

Excpect:

• In this way, we will associate several downloads with a trip.
• After that, related downloads should disappear from the top grid

Action: Return to Loads.

Excpect: Driver 1, Trk/Unit and Trailer should be deactivated and cleared, and a Trip# field should appear under Pro# with the number of the trip in which this Load is linked. Action: Click on the trip number. Excpect: The Truck Trip Management form will open