Differences

This shows you the differences between two versions of the page.

--- tc-25 [2026/03/28 09:30]
216.73.216.86 old revision restored (2025/12/13 10:11)
+++ tc-25 [2026/03/28 12:55] (current)
216.73.216.86 old revision restored (2026/03/28 09:40)
@@ Line 10: / Line 10: @@
   * Press LTL (1)
-**Excpect:** A window will be displayed with 2 grids:
+**Excpect:** A window will be displayed with 2 grids: the top one contains all loads that have the "LTL Partial" attribute, but are not yet associated with trips.
-  * The top one contains all loads that have the "LTL Partial" attribute, but are not yet associated with trips.
 {{ :trk-loadplaning_ltl-new.png?direct |}}
+**Action:**
   * The bottom one contains all previously created trips.
-**Action:**
   * Add a new trip by clicking on the New Trip button (2).
@@ Line 31: / Line 29: @@
 **Excpect:** Driver 1, Trk/Unit and Trailer should be deactivated and cleared, and a Trip# field should appear under Pro# with the number of the trip in which this Load is linked.
 **Action:** Click on the trip number.
 **Excpect:** The Truck Trip Management form will open
-{{ :trk-trucking_trip_management_driver-truck-trailer_check.png?direct |}}
-**Verification:**
-  * (1), (2) Make sure the Trk/Unit and Trailer drop-down lists open and you can select a value from them
-  * (3) Go back to Loads, make sure Driver 1, Trk/Unit and Trailer are full in all Loads associated with the trip you just completed

DRD Test cases