Differences

This shows you the differences between two versions of the page.

--- tc-25 [2025/07/08 07:55]
20.171.207.227 old revision restored (2025/03/29 16:32)
+++ tc-25 [2025/07/16 18:42] (current)
20.171.207.98 old revision restored (2025/05/26 22:06)
@@ Line 8: / Line 8: @@
 **Action:**
   * Open the "Load Planning" tab
-  * Press LTL (1)
+  * Press LTL
-**Excpect:** A window will be displayed with 2 grids:
+**Excpect:** A window will be displayed with 2 grids: the top one contains all loads that have the "LTL Partial" attribute, but are not yet associated with trips.
-  * The top one contains all loads that have the "LTL Partial" attribute, but are not yet associated with trips.
 {{ :trk-loadplaning_ltl-new.png?direct |}}
+**Action:**
   * The bottom one contains all previously created trips.
-**Action:**
+  * Add a new trip by clicking on the New Trip button.
-  * Add a new trip by clicking on the New Trip button (2).
 **Excpect:** Another row will appear in the lower grid
-**Action:** (3) Select 1 or more rows of the top grid,
+**Action:** Select 1 or more rows of the top grid,
 drag them and release them on the desired line of the lower grid
@@ Line 31: / Line 29: @@
 **Excpect:** Driver 1, Trk/Unit and Trailer should be deactivated and cleared, and a Trip# field should appear under Pro# with the number of the trip in which this Load is linked.
 **Action:** Click on the trip number.
 **Excpect:** The Truck Trip Management form will open

DRD Test cases