DRD Test cases

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== ProMiles SDK testing ======

===== Presetting =====

ProMiles API is used by both Brokerage Dispatch and Truck Dispatch

//Action:// Prepare new [[tc-11|Brokerage load]] and new [[tc-15|Truck load]]
  
//Additional condition:// 
  * Stop dates must be today or later
  * Set their status to "Available"
===== ProMiles SDK activation check =====

//Action://

* Open the "Brokerage Dispatch" form, look at the "Update miles" button and the "Mileage Utilities" menu.
  * Open the "Truck Dispatch" form, look at the "Calc miles" button and the "Mileage Utilities" menu.

//Excpectation// They must be inactive.

//Action:// Remember their real state

//Action:// Open "System -> Settings" menu

//Expection:// Form "Dr.Dispatch System Configuration" will open

//Action:// Select "ProMiles SDK" from the left column and look at the checkbox "Use ProMiles Prime".

//Check://
If the checkbox is not checked, the "Update miles" button and the "Mileage Utilities" menu should be inactive.

If everything is correct - check the box, and proceed to the next step

===== Checking work with correct settings =====

{{ :system_setting_promiles_sdk_use_promiles_prime.png?direct&400 |}}
**Actions:**
  * Select System -> Setting -> ProMiles SDK (1)
  * Check the box "Use ProMiles Prime" (2)
  * Enter the correct key in the "ProMiles Prime API key" field (3) and close window
  * Reopen broker window //Be sure to close and open//
  * Select the load created for this test

==== Check calculating miles ====
  The check is carried out twice, for brokerage and and for Truck loading.

=== Brokerage load ===

//Action:// Open the Broker load created in preparation for the test. Click "Update Miles" button

//Expection:// The length of the route must be calculated and the value entered in the field "miles"

An approximate check of the calculated value can be done by building a route in Google maps.

//Action:// Click on "show route"

//Expection:// A Google map will open in the browser window with a built route from the first to the last point

//The length of the route obtained on a Google map and calculated by "ProMiles" may differ slightly due to different principles for building a route for cars and trucks//

//Action:// You need to add one more stop, repeat the calculation check

//Expection:// The distance in the Miles field should increase.

//Action:// Check it again on google map

//Action:// Swap 2nd and 3rd stops

//Expection:// The route should be built differently and the distance in the Miles field should change.

//Action:// Check it again on google map

=== Truck load ===
Open the Truck load created in preparation for the test.

Repeat all the steps as for the brokerage load, but the mileage calculation button here is called "Calc Miles"

==== Check Quick Mile/Routing ====
This function calls the same window both in the Brokerage Dispatcher and in the Truck Dispatcher, and therefore it is enough to check once

//Action:// Select the "Mileage Utilities" menu -> "Quick Mile/Routing"
{{ :promiles_quick_milerouting.png?direct&400 |}} 
//Expection:// The "Quick Mile/Routing" window will open.

//Action:// It is necessary to fill in any of the "From..." fields and any of the "To..." fields. After that press "Run Miles"

//Expection:// The "Miles" field should be filled with the calculated distance.
==== ProMiles Prime Radius Search Check ====
=== Check in the Brokerage Dispatcher ===
//Action:// Select the "Mileage Utilities" menu -> "ProMiles Prime Radius Search".

//Expection:// A "Pro Miles Radius Search (Trucking)" window will appear.
{{ :brk_mileageutiletes_radius_search.png?direct&400 |}}

//Action:// Enter the address in the "Location" field and press "Locate"

//Excpection:// 
If the distance (4) from the specified address (2) to the last drop point (3) is less than the specified distance (1)
then (5): the data of all stop points will be copied into the grid and this distance will be entered in all rows (4)
=== Check in the Truck Dispatcher ===

//Action:// Select the "Mileage Utilities" menu -> "ProMiles Prime Radius Search".

//Excpection:// A "Pro Miles Radius Search (Trucking)" window will appear.
{{ :trk_mileageutiletes_radius_search.png?direct&400 |}}
//Action:// Click "Locate" button
//Expection:// The message "Feature Not Activated, Pleace contact Dr.Dispatch Support About Pro Miles Radius Search" will appear
===== Checking work with incorrect settings =====

//Action:// Do not fill in the "ProMiles Prime API key" field (or fill it with a random set of characters) and close window

//Action:// Reopen broker window //Be sure to close and open//

//Action:// Press "Update Miles"

//Excpection:// Miles field must by 0

//Action:// Quick Mile/Routing

//Excpectation:// Show error message {{ :brk_dispatch_mileageutiletes_error.png?direct&400 |}}

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International

DRD Test cases

User Tools

Site Tools

Page Tools