DRD Test cases

You've loaded an old revision of the document! If you save it, you will create a new version with this data.

====== Creating a trip and checking that the data is stored and displayed correctly ======
==== Preliminary actions. ====
Before you create a trip, you must create one or more [[tc-15|loads]] that will be included in the trip.
At the same time, they need to check the box "LTL Partial"
  Remember the selected Driver 1, Trk/Unit and Trailer (to check their change)

==== Create a trip. ====
**Action:** 
  * Open the "Load Planning" tab
  * Press LTL

**Excpect:** A window will be displayed with 2 grids: the top one contains all loads that have the "LTL Partial" attribute, but are not yet associated with trips.
{{ :trk-loadplaning_ltl-new.png?direct |}}
**Action:** 
  * The bottom one contains all previously created trips.
  * Add a new trip by clicking on the New Trip button.

**Excpect:** Another row will appear in the lower grid

**Action:** Select 1 or more rows of the top grid,
drag them and release them on the desired line of the lower grid

**Excpect:** 
  * In this way, we will associate several downloads with a trip.
  * After that, related downloads should disappear from the top grid

==== Сhecking that the data is stored and displayed correctly ====
**Action:** Return to Loads.

**Excpect:** Driver 1, Trk/Unit and Trailer should be deactivated and cleared, and a Trip# field should appear under Pro# with the number of the trip in which this Load is linked.
**Action:** Click on the trip number.
**Excpect:** The Truck Trip Management form will open

Edit summary

Note: By editing this page you agree to license your content under the following license: CC Attribution-Share Alike 4.0 International

DRD Test cases

User Tools

Site Tools

Page Tools