Differences

This shows you the differences between two versions of the page.

--- tc-27 [2026/01/26 15:04]
216.73.216.128 old revision restored (2025/12/15 14:09)
+++ — (current)
@@ Line 1: / Line 1: @@
-====== ProMiles SDK testing ======
-===== Presetting =====
-**Action:** Prepare new [[tc-11|load]]
-==== Checking if ProMiles SDK is enabled ====
-**Action** Open the "Brokerage Dispatch" form, look at the "Update miles" button and the "Mileage Utilities" menu.
-**Excpectation** They must be inactive.
-**Action** Remember their real state
-**Action:** Open "System -> Settings" menu
-**Expection:** Form "Dr.Dispatch System Configuration" will open
-**Action:** Select "ProMiles SDK" from the left column and look at the checkbox "Use ProMiles Prime".
-//Check://
-If the checkbox is not checked, the "Update miles" button and the "Mileage Utilities" menu should be inactive.
-If everything is correct - check the box, and proceed to the next step
-===== Checking work with correct settings =====
-**Actions:**
-  * Enter the correct key in the "ProMiles Prime API key" field and close window
-  * Reopen broker window //Be sure to close and open//
-  * Select the load created for this test
-==== Check calculating miles ====
-**Action:** Click "Update Miles" button
-**Expected:** The length of the route must be calculated and the value entered in the field "miles"
-  An approximate check of the calculated value can be done by building a route in Google maps.
-**Action:** Click on "show route"
-**Expected:** A Google map will open in the browser window with a built route from the first to the last point
-//The length of the route obtained on a Google map and calculated by "ProMiles" may differ slightly due to different principles for building a route for cars and trucks//
-===== Checking work with incorrect settings =====
-**Action:** Do not fill in the "ProMiles Prime API key" field (or fill it with a random set of characters) and close window
-**Action:** Reopen broker window //Be sure to close and open//
-**Action:** Press "Update Miles"
-**Excpectation:** Miles field must by 0
-**Action:** Quick Mile/Routing
-**Excpectation:** Show error message {{ :brk_dispatch_mileageutiletes_error.png?direct&400 |}}

DRD Test cases

User Tools

Site Tools

Differences

Page Tools