Differences

This shows you the differences between two versions of the page.

--- tc-27 [2026/01/26 15:03]
216.73.216.128 old revision restored (2025/12/15 14:02)
+++ — (current)
@@ Line 1: / Line 1: @@
-====== ProMiles SDK testing ======
-===== Presetting =====
-  ProMiles API is used by both Brokerage Dispatch and Truck Dispatch
-//Action:// Prepare new [[tc-11|Brokerage load]] and new [[tc-15|Truck load]]
-//Additional condition://
-  * Stop dates must be today or later
-  * Set their status to "Available"
-===== ProMiles SDK activation check =====
-//Action://
-  * Open the "Brokerage Dispatch" form, look at the "Update miles" button and the "Mileage Utilities" menu.
-  * Open the "Truck Dispatch" form, look at the "Calc miles" button and the "Mileage Utilities" menu.
-//Excpectation// They must be inactive.
-//Action:// Remember their real state
-//Action:// Open "System -> Settings" menu
-//Expection:// Form "Dr.Dispatch System Configuration" will open
-//Action:// Select "ProMiles SDK" from the left column and look at the checkbox "Use ProMiles Prime".
-//Check://
-If the checkbox is not checked, the "Update miles" button and the "Mileage Utilities" menu should be inactive.
-If everything is correct - check the box, and proceed to the next step
-===== Checking work with correct settings =====
-{{ :system_setting_promiles_sdk_use_promiles_prime.png?direct&400 |}}
-**Actions:**
-  * Select System -> Setting -> ProMiles SDK (1)
-  * Check the box "Use ProMiles Prime" (2)
-  * Enter the correct key in the "ProMiles Prime API key" field (3) and close window
-  * Reopen broker window //Be sure to close and open//
-  * Select the load created for this test
-==== Check calculating miles ====
-  The check is carried out twice, for brokerage and and for Truck loading.
-=== Brokerage load ===
-//Action:// Open the Broker load created in preparation for the test. Click "Update Miles" button
-//Expection:// The length of the route must be calculated and the value entered in the field "miles"
-  An approximate check of the calculated value can be done by building a route in Google maps.
-//Action:// Click on "show route"
-//Expection:// A Google map will open in the browser window with a built route from the first to the last point
-//The length of the route obtained on a Google map and calculated by "ProMiles" may differ slightly due to different principles for building a route for cars and trucks//
-//Action:// You need to add one more stop, repeat the calculation check
-//Expection:// The distance in the Miles field should increase.
-//Action:// Check it again on google map
-//Action:// Swap 2nd and 3rd stops
-//Expection:// The route should be built differently and the distance in the Miles field should change.
-//Action:// Check it again on google map
-=== Truck load ===
-Open the Truck load created in preparation for the test.
-Repeat all the steps as for the brokerage load, but the mileage calculation button here is called "Calc Miles"
-==== Check Quick Mile/Routing ====
-This function calls the same window both in the Brokerage Dispatcher and in the Truck Dispatcher, and therefore it is enough to check once
-//Action:// Select the "Mileage Utilities" menu -> "Quick Mile/Routing"
-{{ :promiles_quick_milerouting.png?direct&400 |}}
-//Expection:// The "Quick Mile/Routing" window will open.
-//Action:// It is necessary to fill in any of the "From..." fields and any of the "To..." fields. After that press "Run Miles"
-//Expection:// The "Miles" field should be filled with the calculated distance.
-==== ProMiles Prime Radius Search Check ====
-=== Check in the Brokerage Dispatcher ===
-//Action:// Select the "Mileage Utilities" menu -> "ProMiles Prime Radius Search".
-//Expection:// A "Pro Miles Radius Search (Trucking)" window will appear.
-{{ :brk_mileageutiletes_radius_search.png?direct&400 |}}
-//Action:// Enter the address in the "Location" field and press "Locate"
-//Excpection://
-If the distance (4) from the specified address (2) to the last drop point (3) is less than the specified distance (1)
-then (5): the data of all stop points will be copied into the grid and this distance will be entered in all rows (4)
-=== Check in the Truck Dispatcher ===
-//Action:// Select the "Mileage Utilities" menu -> "ProMiles Prime Radius Search".
-//Excpection:// A "Pro Miles Radius Search (Trucking)" window will appear.
-{{ :trk_mileageutiletes_radius_search.png?direct&400 |}}
-//Action:// Click "Locate" button
-//Expection:// The message "Feature Not Activated, Pleace contact Dr.Dispatch Support About Pro Miles Radius Search" will appear
-===== Checking work with incorrect settings =====
-//Action:// Do not fill in the "ProMiles Prime API key" field (or fill it with a random set of characters) and close window
-//Action:// Reopen broker window //Be sure to close and open//
-//Action:// Press "Update Miles"
-//Excpection:// Miles field must by 0
-//Action:// Quick Mile/Routing
-//Excpectation:// Show error message {{ :brk_dispatch_mileageutiletes_error.png?direct&400 |}}

DRD Test cases

User Tools

Site Tools

Differences

Page Tools