Differences

This shows you the differences between two versions of the page.

--- tc-27 [2025/12/15 14:02]
216.73.216.58 old revision restored (2025/11/07 15:43)
+++ tc-27 [2025/12/15 14:10] (current)
216.73.216.58 old revision restored (2025/11/07 15:43)
@@ Line 3: / Line 3: @@
 ===== Presetting =====
-**Action:** Prepare new [[tc-11|load]]
+  ProMiles API is used by both Brokerage Dispatch and Truck Dispatch
-==== Checking if ProMiles SDK is enabled ====
+//Action:// Prepare new [[tc-11|Brokerage load]] and new [[tc-15|Truck load]]
-**Action** Open the "Brokerage Dispatch" form, look at the "Update miles" button and the "Mileage Utilities" menu.
-**Excpectation** They must be inactive.
+===== ProMiles SDK activation check =====
-**Action** Remember their real state
+//Action://
-**Action:** Open "System -> Settings" menu
+  * Open the "Brokerage Dispatch" form, look at the "Update miles" button and the "Mileage Utilities" menu.
+  * Open the "Truck Dispatch" form, look at the "Calc miles" button and the "Mileage Utilities" menu.
-**Expection:** Form "Dr.Dispatch System Configuration" will open
+//Excpectation// They must be inactive.
-**Action:** Select "ProMiles SDK" from the left column and look at the checkbox "Use ProMiles Prime".
+//Action:// Remember their real state
+//Action:// Open "System -> Settings" menu
+//Expection:// Form "Dr.Dispatch System Configuration" will open
+//Action:// Select "ProMiles SDK" from the left column and look at the checkbox "Use ProMiles Prime".
 //Check://
@@ Line 26: / Line 32: @@
 ===== Checking work with correct settings =====
-**Action:** Enter the correct key in the "ProMiles Prime API key" field and close window
+{{ :system_setting_promiles_sdk_use_promiles_prime.png?direct&400 |}}
+**Actions:**
+  * Select System -> Setting -> ProMiles SDK (1)
+  * Check the box "Use ProMiles Prime" (2)
+  * Enter the correct key in the "ProMiles Prime API key" field (3) and close window
+  * Reopen broker window //Be sure to close and open//
+  * Select the load created for this test
-**Action:** Reopen broker window //Be sure to close and open//
+==== Check calculating miles ====
+  The check is carried out twice, for brokerage and and for Truck loading.
+=== Brokerage load ===
+//Action:// Open the Broker load created in preparation for the test. Click "Update Miles" button
+//Expection:// The length of the route must be calculated and the value entered in the field "miles"
+  An approximate check of the calculated value can be done by building a route in Google maps.
+//Action:// Click on "show route"
+//Expection:// A Google map will open in the browser window with a built route from the first to the last point
+//The length of the route obtained on a Google map and calculated by "ProMiles" may differ slightly due to different principles for building a route for cars and trucks//
+//Action:// You need to add one more stop, repeat the calculation check
+//Expection:// The distance in the Miles field should increase.
+//Action:// Check it again on google map
+//Action:// Swap 2nd and 3rd stops
+//Expection:// The route should be built differently and the distance in the Miles field should change.
+//Action:// Check it again on google map
+=== Truck load ===
+Open the Truck load created in preparation for the test.
+Repeat all the steps as for the brokerage load, but the mileage calculation button here is called "Calc Miles"
+==== Check Quick Mile/Routing ====
+This function calls the same window both in the Brokerage Dispatcher and in the Truck Dispatcher, and therefore it is enough to check once
+//Action:// Select the "Mileage Utilities" menu -> "Quick Mile/Routing"
+{{ :promiles_quick_milerouting.png?direct&400 |}}
+//Expection:// The "Quick Mile/Routing" window will open.
+//Action:// It is necessary to fill in any of the "From..." fields and any of the "To..." fields. After that press "Run Miles"
+//Expection:// The "Miles" field should be filled with the calculated distance.
+==== ProMiles Prime Radius Search Check ====
+=== Check in the Brokerage Dispatcher ===
+//Action:// Select the "Mileage Utilities" menu -> "ProMiles Prime Radius Search".
+//Expection:// A "Pro Miles Radius Search (Trucking)" window will appear.
+{{ :brk_mileageutiletes_radius_search.png?direct&400 |}}
+//Action:// Enter the address in the "Location" field and press "Locate"
+//Excpection://
+If the distance (4) from the specified address (2) to the last drop point (3) is less than the specified distance (1)
+then (5): the data of all stop points will be copied into the grid and this distance will be entered in all rows (4)
+=== Check in the Truck Dispatcher ===
+//Action:// Select the "Mileage Utilities" menu -> "ProMiles Prime Radius Search".
+//Excpection:// A "Pro Miles Radius Search (Trucking)" window will appear.
+{{ :trk_mileageutiletes_radius_search.png?direct&400 |}}
+//Action:// Click "Locate" button
+//Expection:// The message "Feature Not Activated, Pleace contact Dr.Dispatch Support About Pro Miles Radius Search" will appear
 ===== Checking work with incorrect settings =====
-**Action:** Do not fill in the "ProMiles Prime API key" field (or fill it with a random set of characters) and close window
+//Action:// Do not fill in the "ProMiles Prime API key" field (or fill it with a random set of characters) and close window
+//Action:// Reopen broker window //Be sure to close and open//
-**Action:** Reopen broker window //Be sure to close and open//
+//Action:// Press "Update Miles"
-**Action:** Press "Update Miles"
+//Excpection:// Miles field must by 0
-**Excpectation:**
+//Action:// Quick Mile/Routing
-**Excpectation:** Show error message {{ :brk_dispatch_mileageutiletes_error.png?direct&400 |}}
+//Excpectation:// Show error message {{ :brk_dispatch_mileageutiletes_error.png?direct&400 |}}

DRD Test cases

User Tools

Site Tools

Differences

Page Tools