DRD Test cases

User Tools

Site Tools

Trace:
tc-27

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tc-27 [2025/11/11 02:41]
74.7.227.120 old revision restored (2025/11/03 11:50) 		tc-27 [2025/11/11 13:09] (current)
74.7.227.120 old revision restored (2025/10/29 21:55)
Line 3: Line 3:
 ===== Presetting ===== ===== Presetting =====
  
-  ProMiles API is used by both Brokerage Dispatch and Truck Dispatch+**Action:** Prepare new [[tc-11|load]]
  
-//Action:// Prepare new [[tc-11|Brokerage load]] and new [[tc-15|Truck load]]+==== Checking if ProMiles SDK is enabled ====
  
 +**Action** Open the "Brokerage Dispatch" form, look at the "Update miles" button and the "Mileage Utilities" menu.
  
-===== ProMiles SDK activation check =====+**Excpectation** They must be inactive.
  
-//Action://+*Action** Remember their real state
  
-  * Open the "Brokerage Dispatch" form, look at the "Update miles" button and the "Mileage Utilities" menu. +**Action:" Open "System -> Settings" menu
-  * Open the "Truck Dispatch" form, look at the "Calc miles" button and the "Mileage Utilities" menu.+
  
-//Excpectation// They must be inactive.+**Expection:" Form "Dr.Dispatch System Configuration" will open
  
-//Action:// Remember their real state +**Action:" Select "ProMiles SDK" from the left column and look at the checkbox "Use ProMiles Prime".
- +
-//Action:// Open "System -> Settings" menu +
- +
-//Expection:// Form "Dr.Dispatch System Configuration" will open +
- +
-//Action:// Select "ProMiles SDK" from the left column and look at the checkbox "Use ProMiles Prime".+
  
 //Check:// //Check://
 If the checkbox is not checked, the "Update miles" button and the "Mileage Utilities" menu should be inactive. If the checkbox is not checked, the "Update miles" button and the "Mileage Utilities" menu should be inactive.
  
-If everything is correct - check the box, and proceed to the next step +If everything is correct - check the box, 
- +
-===== Checking work with correct settings ===== +
- +
-{{ :system_setting_promiles_sdk_use_promiles_prime.png?direct&400 |}} +
-**Actions:** +
-  * Select System -> Setting -> ProMiles SDK (1) +
-  * Check the box "Use ProMiles Prime" (2) +
-  * Enter the correct key in the "ProMiles Prime API key" field (3) and close window +
-  * Reopen broker window //Be sure to close and open// +
-  * Select the load created for this test +
- +
-==== Check calculating miles ==== +
-  The check is carried out twice, for brokerage and and for Truck loading. +
- +
-=== Brokerage load === +
- +
-//Action:// Open the Broker load created in preparation for the test. Click "Update Miles" button  +
- +
-//Expection:// The length of the route must be calculated and the value entered in the field "miles" +
- +
-  An approximate check of the calculated value can be done by building a route in Google maps. +
- +
-//Action:// Click on "show route" +
- +
-//Expection:// A Google map will open in the browser window with a built route from the first to the last point +
- +
-//The length of the route obtained on a Google map and calculated by "ProMiles" may differ slightly due to different principles for building a route for cars and trucks// +
- +
-//Action:// You need to add one more stop, repeat the calculation check +
- +
-//Expection:// The distance in the Miles field should increase. +
- +
-//Action:// Check it again on google map +
- +
-//Action:// Swap 2nd and 3rd stops +
- +
-//Expection:// The route should be built differently and the distance in the Miles field should change. +
- +
-//Action:// Check it again on google map +
- +
-=== Truck load === +
-Open the Truck load created in preparation for the test. +
- +
-Repeat all the steps as for the brokerage load, but the mileage calculation button here is called "Calc Miles" +
- +
-==== Check Quick Mile/Routing ==== +
-This function calls the same window both in the Brokerage Dispatcher and in the Truck Dispatcher, and therefore it is enough to check once +
- +
-//Action:// Select the "Mileage Utilities" menu -> "Quick Mile/Routing" +
-{{ :promiles_quick_milerouting.png?direct&400 |}}  +
-//Expection:// The "Quick Mile/Routing" window will open. +
- +
-//Action:// It is necessary to fill in any of the "From..." fields and any of the "To..." fields. After that press "Run Miles" +
- +
-//Expection:// The "Miles" field should be filled with the calculated distance. +
-==== ProMiles Prime Radius Search Check ==== +
-This function calls the same window both in the Brokerage Dispatcher and in the Truck Dispatcher, and therefore it is enough to check once +
- +
-//Action:// Select the "Mileage Utilities" menu -> "ProMiles Prime Radius Search". +
- +
- +
-===== Checking work with incorrect settings ===== +
- +
-//Action:// Do not fill in the "ProMiles Prime API key" field (or fill it with a random set of characters) and close window +
- +
-//Action:// Reopen broker window //Be sure to close and open//+
  
-//Action:// Press "Update Miles"+==== Checking work with incorrect settings ====
  
-//Excpection:// Miles field must by 0+**Action:** Do not fill in the key field (or fill it with a random set of characters)
  
-//Action:// Quick Mile/Routing+**Action:** Reopen broker window //Be sure to close and open//
  
-//Excpectation:// Show error message {{ :brk_dispatch_mileageutiletes_error.png?direct&400 |}}+==== Checking work with correct settings ====
  
 +**Action:** Reopen broker window //Be sure to close and open//
  
tc-27.txt · Last modified: 2025/11/11 13:09 by 74.7.227.120

Page Tools

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
CC Attribution-Share Alike 4.0 International Donate Powered by PHP Valid HTML5 Valid CSS Driven by DokuWiki